?php /** * @package WordPress * @subpackage Default_Theme */ get_header(); ?>

Archive for the ‘Nitro RC Engines’ Category

Posted on September 28th, 2011 by Marty Davis
Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
Posted in Nitro RC Engines, RC Nitro Engine Analysis Software | No Comments »






Discover How you can Watch Over The Shoulder

of Expert RC Nitro Engine Builders!!



Even if you have NO Experience Tuning RC Nitro Engines

You Can Learn How to Build an Awesome RC Nitro Engine.




285x306.jpg - 59755 Bytes




With this Comprehensive Tuning Software,

you will instantly learn how to Tune, Modify &

Build Nitro Engines that will “Dominate the

Competition” in any segment of Nitro RC

Racing.





From: Marty Davis


Dear Fellow Nitro RC Racer,





History of the Engine Analysis Software Development:



During the late 1980′s, a group of rc boat modelers, who were also engineers, started talking about the possibility of making a tool to accurately measure and document RC Engines. Was it possible to get rid of the inaccurate degree wheel?


Could they convert measurements into useful data, then apply the results to their engines?


They found that there were many complex formulas involved in solving these problems. After several years of development and refinement of the first Engine Analysis Software, the group developed the Engine Analysis Software. They used it continually and found it indispensable. Performance of the engines of this group increased to the point, that they were dominating National Model Competitions.


The group decided that this Software was too important to the RC Modeling Community to keep to themselves. A few copies of the software were provided to some of the top rc engine builders and tuners across the country. THEY LOVED IT and used it every day in their engine building businesses.


The software development group decided to offer it for sale to competitors on a very limited basis. People from across the World got wind of the availability and the pressure was on to make it available to everyone. Engine Manufacturers began using it in their R & D Labs. Engine Tuners started using it in their everyday engine modification businesses. “Super Serious RC Competitors” started using it to build and tune their personal engines.


The program is now used by Serious RC Competitors in Boats, Planes, Cars, and all other forms of Nitro RC Racing and Competition.



RC Engine Analysis Software
Compete at the Highest Level !


The Engine Analysis Software will allow you to tune and refine Nitro Engines quickly and accurately. The Engine Analysis Software will allow you to UNDERSTAND RC Nitro Engines. Have an awesome engine – duplicate it easily. You will be able to produce engines that will “SUPER PERFORM”. Get a FREE Database of dyno and race proven SUPER ENGINES.



Click Here To Order Now


Do you race a Nitro On Road Car, Dune Buggy, RC Truck, RC Nitro Boat, High Performance Airplane or Helicopter?



Get the Software the Pro’s Use…


Competitors who are REALLY fast, in all forms of RC Racing, are the ones who understand HOW to build and tune a top performing engine.




  • Have you noticed: “The Engine Guru’s talk in a language that the average RC Competitor doesn’t understand”
  • How can these people be getting such AMAZING performance?
  • Can I produce an engine which will perform as well as theirs?
  • Answer: ABSOLUTELY !!!



Even if you don’t own a lot of sophisticated tools and equipment, you can easily produce great engines for your use. The Engine Analysis Software makes the process, possible and easy !


Tuning an engine using good fit, good time/area relationships and correct compression ratios is not difficult now!


Learning the procedures to build a top performing engine are EASY, using The Engine Analysis Software.


What are the chances of the average modeler “stumbling onto” the secrets of building a top performing engine, without The Engine Analysis Software?


NO CHANCE AT ALL !



The Engine Analysis Software includes many useful sections including:


  • Calculation of Compression Ratios in Two Methods
  • Conversion of Simple Measurements into Degrees of Duration
  • Head Manufacturing Module
  • Carb Sizing Module
  • Time/Area Study Section
  • Maximum Rod Angle Output
  • Blow Down Degree Output
  • Squish Velocity Calculations
  • Open & Closing Points for Rotor or Crank Induction
  • Tuned Pipe Builder
  • And MUCH MORE



All outputs are automatically generated, after inputting, a few specific engine measurements.


You will immediately discover that small changes made using the Engine Analysis Software will yield HUGE performance increases.






I’ll be blunt: I really want you to have this Important Software!!
I am POSITIVE that you will get more benefit than you can imagine.



Many years of development have gone into this Software and I have decided that in order to make it available to the most number of hobbiests, I need to place a very reasonable price on the software. I decided to offer this software at a price that any serious competitor can afford. I know that this is a very special deal which will transform your hobby. If you’re still not 100% sure that this software is critical for you, please contact me directly for specific questions. I have a Chat Link at the Top of the Page to answer any questions. I am positive that you will look back and say that this was the best investment that you EVER MADE in your rc hobby.



 

$$99.95 is not much to spend to enhance your racing!
Get your hands on The Engine Analysis Software and start using it right away to improve your competitive level!


 


It’s Easy To Order…

 

 



Avoid being an “Average RC Racer”. Move your level of competition up to the top tier and enjoy your hobby even more.


If you take this first step towards moving to the front of the pack, you will enjoy your RC Hobby to the level that you deserve.



The choice is yours: Either you will continue to be an average RC Racer, or you will move to the front of the pack. If you are serious about RC Competition, this is a MUST HAVE PRODUCT.

To get your Engine Analysis Software on the way, all you need to do is complete the order form, and a custom software disk will be on the way.


Don’t you owe it to your hobby, to try the Engine Analysis Software today?





Sincerely,

Marty Davis



P.S. If you want to take advantage of the most extensive resource of RC Engine Tuning Information… if you want to get a complete database of proven RC Engines… the only way is to order The Engine Analysis Software at this Special Price.


P.P.S Nobody can provide a product like this with such an extensive database of engines and information which will totally transform your hobby.

 

 



BLOG

SITEMAP
Privacy Policy
SA Site
Affiliate Program



EnglishFrenchGermanItalianPortugueseRussianSpanish
Arrow.png - 7090 BytesPlease enter your email to gain access to our Past Technical Articles.
Name:
We Respect Your Privacy - We will NEVER share your email address with Anyone!

Categories

 

Recent Posts